PEB / PESB Series

Primary Applications:

Industrial-strength glass-filled nylon globe valve with self-cleaning scrubber and stainless steel screen for reliable performance in dirty water applications.

Features and Benefits:

Durable glass-filled nylon construction with nylon-reinforced rubber diaphragm for long life and reliable performance.
Globe configuration.
Normally closed, forward flow design.
Slow closing to prevent water hammer and subsequent system damage.
Low flow capability for a wide range of applications.
One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service.
Flow control handle adjusts water flows as needed.
Manual internal bleed manually operates the valve without allowing water into the valve box; allows pressure regulator to be adjusted without turning the valve on at the controller first.
Manual external bleed permits flushing debris from the system. Recommended for system start up and after repairs.
Stainless steel studs molded into the body. Bonnet can be attached and removed more easily and more often without damaging threads.

Models:

100-PEB: 1" (26/34)
150-PEB: 1 1/2" (40/49)
200-PEB: 2" (50/60)
All models available with BSP threads
Rain Bird recommends flow rates in the supply line not to exceed 7.5 feet/second (2,3 m/s) in order to reduce the effects of water hammer.
For flows below 5 GPM (1,14 m3/h; 0,32 l/s), Rain Bird recommends use of upstream filtration to prevent debris from collecting below the diaphragm.
For flows below 10 GPM (2,27 m3/h; 0,63 l/s) Rain Bird recommends the flow control stem be turned down two full turns from the fully open position.

Specifications:

Pressure: 20 to 200 psi (1,4 to 13,8 bar)
Flow without PRS-D option: 0.25 to 200 GPM
(0,06 to 45 m3/h; 0,02 to 12,60 l/s)
Flow with PRS-D option: 5 to 200 GPM
(1,14 to 45 m3/h; 0,32 to 12,60 l/s)
Temperature: Up to 150 F (66 C)
24 VAC 50/60 Hz (cycles per second) solenoid power requirement:
0.41 A (9.8 VA) inrush current; 0.28 A (6.7 VA) holding current
Solenoid coil resistance: 24 Ohms, nominal

Options:

Accommodates optional, field-installed PRS-D pressure regulating module to ensure optimum sprinkler performance.
Accepts latching solenoid for use with Rain Bird battery-operated controllers.
Optional purple flow control handle for non-potable water applications PEB-NP-HAN1 (1"); PEB-NP-HAN2 (1 1/2" and 2").

Dimensions:

100-PEB:
6 1/2" x 4" x 4"
(16,5 cm) x (10,2 cm) x (10,2 cm)
150-PEB:
8" x 6" x 6"
(20,3 cm) x (15,2 cm) x (15,2 cm)
200-PEB:
8" x 6" x 6"
(20,3 cm) x (15,2 cm) x (15,2 cm)
Note: The PRS-D option adds 2" (5,1 cm) to the valve height.

PEB / PESB Series